Tolerance ±.0002" MMC | Precision Engineer T-Shirt

100% Airlume Combed Ring-Spun CottonLightweight

  • Navy t-shirt featuring "TOLERANCE: ±.0002" (M)" blueprint precision engineering graphic.
  • Man in navy t-shirt featuring "TOLERANCE: ±.0002" (M)" blueprint precision engineering graphic.
  • Woman in navy t-shirt featuring "TOLERANCE: ±.0002" (M)" blueprint precision engineering graphic.
  • Close up of navy t-shirt featuring "TOLERANCE: ±.0002" (M)" blueprint precision engineering graphic.
  • Man in black t-shirt featuring "TOLERANCE: ±.0002" (M)" blueprint precision engineering graphic.
  • Woman in black t-shirt featuring "TOLERANCE: ±.0002" (M)" blueprint precision engineering graphic.
  • Close up of black t-shirt featuring "TOLERANCE: ±.0002" (M)" blueprint precision engineering graphic.
  • Man in white t-shirt featuring "TOLERANCE: ±.0002" (M)" blueprint precision engineering graphic.
  • Woman in white t-shirt featuring "TOLERANCE: ±.0002" (M)" blueprint precision engineering graphic.
  • Close up of white t-shirt featuring "TOLERANCE: ±.0002" (M)" blueprint precision engineering graphic.
1 10
€25,95 EUR
€25,95 EUR
Rea Slutsåld
Tullavgifter och skatter ingår. Frakt beräknas i kassan.
5.0 (6 store reviews)
Color
Size

Shipped from the EU

Size Guide

Height: 5'5" (165cm)

Chest circumference: 34.2" (87cm)

Waist circumference: 25.2" (64cm)

Hips: 37" (94cm)

Height: 6'1" (185cm)

Chest circumference: 39.4" (100cm)

Waist circumference: 30.3" (77cm)

Hips: 36.6" (93cm)

Spec Block

Design Story

Built for the engineer who lives where MMC, bonus tolerance, and ±.0002" are just part of the daily vocabulary.

In aerospace and medical device manufacturing, ±.0002" isn't just a tolerance—it's a way of life. One ten-thousandth of an inch separates success from scrap. This engineer t-shirt is for the machinists who hit those numbers, the quality engineers who verify them, and the designers who dare to specify them. When you're working to Maximum Material Condition tolerances, every decision matters. Wear your precision with pride.

Use Case

Best For

Best for precision machinists, mechanical designers, and quality engineers working in aerospace, medical device, or any place where clearance lives in microns.

  • CNC machinists holding ±0.0002" tolerances on critical features.
  • Quality engineers using CMMs to verify aerospace and medical parts.
  • Mechanical designers specifying GD&T on high-precision drawings.
  • Manufacturing engineers optimizing processes for micron-level accuracy.

Signal

Gift Guide

A highly specced gift for GD&T nerds, inspection leads, and toolmakers who think in maximum material condition before they think in coffee.

Perfect engineer gift for anyone working to micron tolerances. Essential mechanical engineer t-shirt for aerospace, medical device, and precision tooling professionals. Premium machinist apparel celebrating ±0.0002" precision engineering.

Produkt-specifikationer

The Premium Fit You Deserve.

This isn't just another stiff shirt. We use the Bella+Canvas 3001, renowned for its incredibly soft, broken-in feel right out of the box.

  • Fit & Feel: Retail Fit (Unisex) – True to size with a slightly tailored cut. Not too boxy, not too tight.
  • Premium Fabric: 100% Airlume combed & ring-spun cotton (4.2 oz/yd²). Pre-shrunk to minimize shrinkage.
  • Durability: Side-seamed construction with shoulder-to-shoulder taping for lasting shape.
  • Ethical Sourcing: Dyed & Cut in the USA, assembled in Nicaragua/Honduras/Guatemala.
  • Printed with Care: Printed locally to ensure faster shipping and reduced carbon footprint.

Model Reference: Bella+Canvas 3001 (The Gold Standard of Premium Tees).

Vaschhandledning

  • Wash 30C Icon

    Wash cold (30°C / 86°F), inside out, with similar colors.

    Use mild detergent. No bleach. No softeners.

  • No Bleach Icon

    Do not use bleach. It can damage fiber integrity.

    Tip: Use oxygen-based stain removers if necessary.

  • Tumble Dry Low Icon

    Tumble dry Low or Hang dry (Recommended).

    Optimum: Flat air dry to preserve fiber tension.

  • Iron Low Icon

    Iron on Low Heat if needed. Do NOT iron prints.

    Fabric naturally resists wrinkling post-wash.

  • No Dry Clean Icon

    Do not dry clean. Chemical solvents damage prints.

  • Eco Ink Icon

    Water-based inks.

    A faint scent may be present after printing and typically dissipates after the first wash.

"Treat your gear like hardware. Maintain it."

Certifieringar (komponentnivå)

The certifications below apply exclusively to the blank garment manufacturer and inks. The final printed product sold by grabNade is not independently certified.

• WRAP (Worldwide Responsible Accredited Production): The blank garment (Bella+Canvas 3001) is manufactured in WRAP-Platinum certified facilities, ensuring ethical, humane, and lawful conditions.
• FLA (Fair Labor Association): Bella+Canvas is an accredited FLA Participating Company, committed to upholding the highest labor standards globally.
• Eco-Friendly Dyes: The dyeing process uses bluesign®-approved dyes only, ensuring strict chemical safety and reduced water impact.
• Printing Safety: Our printing partners use water-based inks that are OEKO-TEX® Eco Passport certified, safe for adults and children.

Note: Any slight scent from the fixation agent is normal and disappears after the first wash.
More info: Supplier Certifications

Product Datasheet
StyleUnisex Regular T-Shirt
FitUnisex · Airlume 142 GSM
Blank ReferenceBella+Canvas 3001
Third-Party Certifications , WRAP, FLA, bluesign®, OEKO-TEX® Eco Passport · View supplier certifications
ProductionPrint on demand · Ethical manufacturing
BrandgrabNade
Product Safety (EU / GPSR)

Age Restrictions

  • For adults only.

EU Warranty

  • 2 years statutory warranty in accordance with EU consumer law.

EU Product Safety & GPSR Compliance

In compliance with the General Product Safety Regulation (GPSR), grabNade and SINDEN VENTURES LIMITED ensure that all consumer products offered are safe and meet EU standards.

For any product safety related inquiries or concerns, please contact our EU representative:
📧 gpsr@sindenventures.com

320, rue Saint-Honoré, 75001 Paris, France
— or —
Markou Evgenikou 11, Mesa Geitonia, 4002, Limassol, Cyprus

Visa alla uppgifter

> Featured In

GD&T Explained: What Tolerances Actualy Mean

GD&T Explained: What Tolerances Actualy Mean

What does Geometric Dimensioning and Tolerancing (GD&T) actually control on an engineering drawing? While traditional plus/minus tolerances only dictate size, GD&T explicitly defines the shape,...

[ READ ARTICLE ]