As-Cast Surface Finish | Mechanical Engineer T-Shirt

100% Airlume Combed Ring-Spun CottonLightweight

  • Navy t-shirt featuring "As-Cast Survivor" text and an Ra 50 surface roughness symbol for mechanical engineer.
  • Man in navy t-shirt featuring "As-Cast Survivor" text and an Ra 50 surface roughness symbol for mechanical engineer.
  • Woman in navy t-shirt featuring "As-Cast Survivor" text and an Ra 50 surface roughness symbol for mechanical engineer.
  • Close up of navy t-shirt featuring "As-Cast Survivor" text and an Ra 50 surface roughness symbol for mechanical engineer.
  • Man in black t-shirt featuring "As-Cast Survivor" text and an Ra 50 surface roughness symbol for mechanical engineer.
  • Woman in black t-shirt featuring "As-Cast Survivor" text and an Ra 50 surface roughness symbol for mechanical engineer.
  • Close up of black t-shirt featuring "As-Cast Survivor" text and an Ra 50 surface roughness symbol for mechanical engineer.
  • Man in white t-shirt featuring "As-Cast Survivor" text and an Ra 50 surface roughness symbol for mechanical engineer.
  • Woman in white t-shirt featuring "As-Cast Survivor" text and an Ra 50 surface roughness symbol for mechanical engineer.
  • Close up of white t-shirt featuring "As-Cast Survivor" text and an Ra 50 surface roughness symbol for mechanical engineer.
1 10
€25,95 EUR
€25,95 EUR
Rea Slutsåld
Tullavgifter och skatter ingår. Frakt beräknas i kassan.
5.0 (6 store reviews)
Color
Size

Shipped from the EU

Size Guide

Height: 5'5" (165cm)

Chest circumference: 34.2" (87cm)

Waist circumference: 25.2" (64cm)

Hips: 37" (94cm)

Height: 6'1" (185cm)

Chest circumference: 39.4" (100cm)

Waist circumference: 30.3" (77cm)

Hips: 36.6" (93cm)

Spec Block

Design Story

Built for engineers who’ve survived as-cast surfaces, bad pours, and Ra 50 days where finishing wasn’t even on the table.

Some parts are finely milled to an Ra 0.8 mirror finish. Other parts come straight out of the sand mold, rough, tough, and ready to carry the structural load. If you are the kind of engineer who lacks a corporate filter but gets the hard work done, you are an "As-Cast Survivor." This engineer t-shirt celebrates the raw, unpolished professionals of the foundry and the shop floor. No secondary machining required—what you see is exactly what you get.

Use Case

Best For

Best for metallurgists, casting engineers, and heavy manufacturing crews who live with cast surfaces long before machining cleans them up.

  • Mechanical engineers designing heavy castings and forgings.
  • Foundry workers, metallurgists, and materials engineers.
  • QA inspectors who check surface finish callouts on blueprints.
  • Manufacturing professionals who describe their personality as "rough around the edges."

Signal

Gift Guide

A tough gift for anyone in foundries, steel mills, or rough machining who has earned every scratch, chip, and Ra 50 shift on the shop floor.

This is a highly specialized engineer gift idea for the heavy industry professional. It’s an essential piece of manufacturing workwear that doubles as a brilliant funny engineer organic hoodie. Whether you’re shopping for a metallurgical engineer or a mechanical designer, this STEM clothing proves you actually understand their world.

Produkt-specifikationer

The Premium Fit You Deserve.

This isn't just another stiff shirt. We use the Bella+Canvas 3001, renowned for its incredibly soft, broken-in feel right out of the box.

  • Fit & Feel: Retail Fit (Unisex) – True to size with a slightly tailored cut. Not too boxy, not too tight.
  • Premium Fabric: 100% Airlume combed & ring-spun cotton (4.2 oz/yd²). Pre-shrunk to minimize shrinkage.
  • Durability: Side-seamed construction with shoulder-to-shoulder taping for lasting shape.
  • Ethical Sourcing: Dyed & Cut in the USA, assembled in Nicaragua/Honduras/Guatemala.
  • Printed with Care: Printed locally to ensure faster shipping and reduced carbon footprint.

Model Reference: Bella+Canvas 3001 (The Gold Standard of Premium Tees).

Vaschhandledning

  • Wash 30C Icon

    Wash cold (30°C / 86°F), inside out, with similar colors.

    Use mild detergent. No bleach. No softeners.

  • No Bleach Icon

    Do not use bleach. It can damage fiber integrity.

    Tip: Use oxygen-based stain removers if necessary.

  • Tumble Dry Low Icon

    Tumble dry Low or Hang dry (Recommended).

    Optimum: Flat air dry to preserve fiber tension.

  • Iron Low Icon

    Iron on Low Heat if needed. Do NOT iron prints.

    Fabric naturally resists wrinkling post-wash.

  • No Dry Clean Icon

    Do not dry clean. Chemical solvents damage prints.

  • Eco Ink Icon

    Water-based inks.

    A faint scent may be present after printing and typically dissipates after the first wash.

"Treat your gear like hardware. Maintain it."

Certifieringar (komponentnivå)

The certifications below apply exclusively to the blank garment manufacturer and inks. The final printed product sold by grabNade is not independently certified.

• WRAP (Worldwide Responsible Accredited Production): The blank garment (Bella+Canvas 3001) is manufactured in WRAP-Platinum certified facilities, ensuring ethical, humane, and lawful conditions.
• FLA (Fair Labor Association): Bella+Canvas is an accredited FLA Participating Company, committed to upholding the highest labor standards globally.
• Eco-Friendly Dyes: The dyeing process uses bluesign®-approved dyes only, ensuring strict chemical safety and reduced water impact.
• Printing Safety: Our printing partners use water-based inks that are OEKO-TEX® Eco Passport certified, safe for adults and children.

Note: Any slight scent from the fixation agent is normal and disappears after the first wash.
More info: Supplier Certifications

Product Datasheet
StyleUnisex Regular T-Shirt
FitUnisex · Airlume 142 GSM
Blank ReferenceBella+Canvas 3001
Third-Party Certifications , WRAP, FLA, bluesign®, OEKO-TEX® Eco Passport · View supplier certifications
ProductionPrint on demand · Ethical manufacturing
BrandgrabNade
Product Safety (EU / GPSR)

Age Restrictions

  • For adults only.

EU Warranty

  • 2 years statutory warranty in accordance with EU consumer law.

EU Product Safety & GPSR Compliance

In compliance with the General Product Safety Regulation (GPSR), grabNade and SINDEN VENTURES LIMITED ensure that all consumer products offered are safe and meet EU standards.

For any product safety related inquiries or concerns, please contact our EU representative:
📧 gpsr@sindenventures.com

320, rue Saint-Honoré, 75001 Paris, France
— or —
Markou Evgenikou 11, Mesa Geitonia, 4002, Limassol, Cyprus

Visa alla uppgifter

> Featured In

As-Cast Surface Finish - Ra 50

As-Cast Surface Finish - Ra 50

What does an "as-cast" Ra 50 surface finish actually mean on an engineering drawing? It represents the roughest standard finish—raw and unmachined, straight from the...

[ READ ARTICLE ]