Turning Point Ra 6.3 | CNC Machinist T-Shirt

100% Airlume Combed Ring-Spun CottonLightweight

  • White t-shirt featuring "Turning Point" text and an Ra 6.3 surface finish machining symbol.
  • Man in white t-shirt featuring "Turning Point" text and an Ra 6.3 surface finish machining symbol.
  • Woman in white t-shirt featuring "Turning Point" text and an Ra 6.3 surface finish machining symbol.
  • Close up of white t-shirt featuring "Turning Point" text and an Ra 6.3 surface finish machining symbol.
  • Man in black t-shirt featuring "Turning Point" text and an Ra 6.3 surface finish machining symbol.
  • Woman in black t-shirt featuring "Turning Point" text and an Ra 6.3 surface finish machining symbol.
  • Close up of white t-shirt featuring "Turning Point" text and an Ra 6.3 surface finish machining symbol.
  • Man in navy t-shirt featuring "Turning Point" text and an Ra 6.3 surface finish machining symbol.
  • Woman in navy t-shirt featuring "Turning Point" text and an Ra 6.3 surface finish machining symbol.
  • Close up of white t-shirt featuring "Turning Point" text and an Ra 6.3 surface finish machining symbol.
1 10
€25,95 EUR
€25,95 EUR
Rea Slutsåld
Tullavgifter och skatter ingår. Frakt beräknas i kassan.
5.0 (6 store reviews)
Color
Size

Shipped from the EU

Size Guide

Height: 5'5" (165cm)

Chest circumference: 34.2" (87cm)

Waist circumference: 25.2" (64cm)

Hips: 37" (94cm)

Height: 6'1" (185cm)

Chest circumference: 39.4" (100cm)

Waist circumference: 30.3" (77cm)

Hips: 36.6" (93cm)

Spec Block

Design Story

Built for machinists who know Ra 6.3 is standard—and that smart people in manufacturing are the real turning point.

Not every surface needs an Ra 0.8 mirror polish. Sometimes, a standard "as-machined" finish is exactly what the blueprint ordered. In the shop, Ra 6.3 is the ultimate pragmatic finish—rough enough to show the tool marks, smooth enough to get the job done. The "Turning Point" tee is for the CNC machinist or mechanical engineer who knows that over-engineering is just a waste of cycle time. Make the cut, hit the tolerance, and move on to the next setup.

Use Case

Best For

Best for CNC operators, process engineers, and toolmakers who hit Ra 6.3 on purpose and move production forward one good setup at a time.

  • CNC lathe operators and machinists who read G-code and surface finish callouts.
  • Mechanical engineers drafting practical, cost-effective blueprints.
  • Manufacturing engineers optimizing feeds, speeds, and cycle times.
  • Pragmatic professionals who refuse to over-polish a functional part.

Signal

Gift Guide

A dialed‑in gift for machinists, manufacturing engineers, and apprentices hitting the point where their work is finally running at spec—and on repeat.

If you are searching for authentic machinist apparel, this is the ultimate engineer gift idea. Perfect for a CNC programmer or a lathe operator, this engineer eco hoodie speaks directly to the shop floor. It’s an essential piece of manufacturing workwear that proves you know the difference between roughing and finishing.

Produkt-specifikationer

The Premium Fit You Deserve.

This isn't just another stiff shirt. We use the Bella+Canvas 3001, renowned for its incredibly soft, broken-in feel right out of the box.

  • Fit & Feel: Retail Fit (Unisex) – True to size with a slightly tailored cut. Not too boxy, not too tight.
  • Premium Fabric: 100% Airlume combed & ring-spun cotton (4.2 oz/yd²). Pre-shrunk to minimize shrinkage.
  • Durability: Side-seamed construction with shoulder-to-shoulder taping for lasting shape.
  • Ethical Sourcing: Dyed & Cut in the USA, assembled in Nicaragua/Honduras/Guatemala.
  • Printed with Care: Printed locally to ensure faster shipping and reduced carbon footprint.

Model Reference: Bella+Canvas 3001 (The Gold Standard of Premium Tees).

Vaschhandledning

  • Wash 30C Icon

    Wash cold (30°C / 86°F), inside out, with similar colors.

    Use mild detergent. No bleach. No softeners.

  • No Bleach Icon

    Do not use bleach. It can damage fiber integrity.

    Tip: Use oxygen-based stain removers if necessary.

  • Tumble Dry Low Icon

    Tumble dry Low or Hang dry (Recommended).

    Optimum: Flat air dry to preserve fiber tension.

  • Iron Low Icon

    Iron on Low Heat if needed. Do NOT iron prints.

    Fabric naturally resists wrinkling post-wash.

  • No Dry Clean Icon

    Do not dry clean. Chemical solvents damage prints.

  • Eco Ink Icon

    Water-based inks.

    A faint scent may be present after printing and typically dissipates after the first wash.

"Treat your gear like hardware. Maintain it."

Certifieringar (komponentnivå)

The certifications below apply exclusively to the blank garment manufacturer and inks. The final printed product sold by grabNade is not independently certified.

• WRAP (Worldwide Responsible Accredited Production): The blank garment (Bella+Canvas 3001) is manufactured in WRAP-Platinum certified facilities, ensuring ethical, humane, and lawful conditions.
• FLA (Fair Labor Association): Bella+Canvas is an accredited FLA Participating Company, committed to upholding the highest labor standards globally.
• Eco-Friendly Dyes: The dyeing process uses bluesign®-approved dyes only, ensuring strict chemical safety and reduced water impact.
• Printing Safety: Our printing partners use water-based inks that are OEKO-TEX® Eco Passport certified, safe for adults and children.

Note: Any slight scent from the fixation agent is normal and disappears after the first wash.
More info: Supplier Certifications

Product Datasheet
StyleUnisex Regular T-Shirt
FitUnisex · Airlume 142 GSM
Blank ReferenceBella+Canvas 3001
Third-Party Certifications , WRAP, FLA, bluesign®, OEKO-TEX® Eco Passport · View supplier certifications
ProductionPrint on demand · Ethical manufacturing
BrandgrabNade
Product Safety (EU / GPSR)

Age Restrictions

  • For adults only.

EU Warranty

  • 2 years statutory warranty in accordance with EU consumer law.

EU Product Safety & GPSR Compliance

In compliance with the General Product Safety Regulation (GPSR), grabNade and SINDEN VENTURES LIMITED ensure that all consumer products offered are safe and meet EU standards.

For any product safety related inquiries or concerns, please contact our EU representative:
📧 gpsr@sindenventures.com

320, rue Saint-Honoré, 75001 Paris, France
— or —
Markou Evgenikou 11, Mesa Geitonia, 4002, Limassol, Cyprus

Visa alla uppgifter

> Featured In

The Ultimate Engineer Gift Guide (2026)

The Ultimate Engineer Gift Guide (2026)

Discover the Ultimate 2026 Gift Guide for Engineers, Machinists, and Tech Professionals. Finding the right gift for highly technical experts can be challenging. This comprehensive...

[ READ ARTICLE ]