Pride In The Polish Ra 0.02 | MedTech Engineer T-Shirt

100% Airlume Combed Ring-Spun CottonLightweight  | Free Shipping on 3+ items

  • Black t-shirt featuring an Ra 0.02 surface finish symbol on a flat line that turns into an ECG.
  • Man in black t-shirt featuring an Ra 0.02 surface finish symbol on a flat line that turns into an ECG.
  • Woman in black t-shirt featuring an Ra 0.02 surface finish symbol on a flat line that turns into an ECG.
  • Close up of black t-shirt featuring an Ra 0.02 surface finish symbol on a flat line that turns into an ECG.
  • Man in navy t-shirt featuring an Ra 0.02 surface finish symbol on a flat line that turns into an ECG.
  • Woman in navy t-shirt featuring an Ra 0.02 surface finish symbol on a flat line that turns into an ECG.
  • Close up of navy t-shirt featuring an Ra 0.02 surface finish symbol on a flat line that turns into an ECG.
  • Man in white t-shirt featuring an Ra 0.02 surface finish symbol on a flat line that turns into an ECG.
  • Woman in white t-shirt featuring an Ra 0.02 surface finish symbol on a flat line that turns into an ECG.
  • Close up of white t-shirt featuring an Ra 0.02 surface finish symbol on a flat line that turns into an ECG.
1 10
€25,95 EUR
€25,95 EUR
Rea Slutsåld
Tullavgifter och skatter ingår. Frakt beräknas i kassan.
5.0 (6 store reviews)
Color
Size

Shipped from the EU

Size Guide

Height: 5'5" (165cm)

Chest circumference: 34.2" (87cm)

Waist circumference: 25.2" (64cm)

Hips: 37" (94cm)

Height: 6'1" (185cm)

Chest circumference: 39.4" (100cm)

Waist circumference: 30.3" (77cm)

Hips: 36.6" (93cm)

Spec Block

Design Story

Built for medtech engineers and HTM pros who take pride in every polished edge, clean surface, and device that goes back into service safer than it arrived.

In MedTech manufacturing, a surface finish isn't just about friction—it's about human life. An Ra 0.02 finish on a surgical implant means the difference between a successful procedure and a rejected joint. To get that perfect mirror polish takes intense dedication, skill, and absolute pride in the craft. This engineer t-shirt connects the cold precision of the polishing wheel to the beating heart of the patient. Because on this shop floor, the tolerances you hold today keep someone alive tomorrow.

Use Case

Best For

Best for biomedical engineers, medical device techs, and OR support teams who live where stainless, tolerances, and regulations all meet the real world.

  • Manufacturing engineers in the MedTech and medical device industries.
  • Lapping, honing, and polishing technicians working on critical components.
  • Quality engineers conducting surface inspections for FDA compliance.
  • Biomedical engineers designing the next generation of joint replacements.

Signal

Gift Guide

A quiet, accurate gift for the medtech or clinical engineer in your life who keeps patients safe by obsessing over details nobody ever sees.

Looking for a deeply meaningful engineer gift idea? This is the ultimate engineer t-shirt for anyone in the medical device manufacturing sector. It’s an essential piece of STEM clothing for biomedical engineering students or a proud piece of manufacturing workwear for quality inspectors.

Produkt-specifikationer

The Premium Fit You Deserve.

This isn't just another stiff shirt. We use the Bella+Canvas 3001, renowned for its incredibly soft, broken-in feel right out of the box.

  • Fit & Feel: Retail Fit (Unisex) – True to size with a slightly tailored cut. Not too boxy, not too tight.
  • Premium Fabric: 100% Airlume combed & ring-spun cotton (4.2 oz/yd²). Pre-shrunk to minimize shrinkage.
  • Durability: Side-seamed construction with shoulder-to-shoulder taping for lasting shape.
  • Ethical Sourcing: Dyed & Cut in the USA, assembled in Nicaragua/Honduras/Guatemala.
  • Printed with Care: Printed locally to ensure faster shipping and reduced carbon footprint.

Model Reference: Bella+Canvas 3001 (The Gold Standard of Premium Tees).

Vaschhandledning

  • Wash 30C Icon

    Wash cold (30°C / 86°F), inside out, with similar colors.

    Use mild detergent. No bleach. No softeners.

  • No Bleach Icon

    Do not use bleach. It can damage fiber integrity.

    Tip: Use oxygen-based stain removers if necessary.

  • Tumble Dry Low Icon

    Tumble dry Low or Hang dry (Recommended).

    Optimum: Flat air dry to preserve fiber tension.

  • Iron Low Icon

    Iron on Low Heat if needed. Do NOT iron prints.

    Fabric naturally resists wrinkling post-wash.

  • No Dry Clean Icon

    Do not dry clean. Chemical solvents damage prints.

  • Eco Ink Icon

    Water-based inks.

    A faint scent may be present after printing and typically dissipates after the first wash.

"Treat your gear like hardware. Maintain it."

Certifieringar (komponentnivå)

The certifications below apply exclusively to the blank garment manufacturer and inks. The final printed product sold by grabNade is not independently certified.

• WRAP (Worldwide Responsible Accredited Production): The blank garment (Bella+Canvas 3001) is manufactured in WRAP-Platinum certified facilities, ensuring ethical, humane, and lawful conditions.
• FLA (Fair Labor Association): Bella+Canvas is an accredited FLA Participating Company, committed to upholding the highest labor standards globally.
• Eco-Friendly Dyes: The dyeing process uses bluesign®-approved dyes only, ensuring strict chemical safety and reduced water impact.
• Printing Safety: Our printing partners use water-based inks that are OEKO-TEX® Eco Passport certified, safe for adults and children.

Note: Any slight scent from the fixation agent is normal and disappears after the first wash.
More info: Supplier Certifications

Product Datasheet
StyleUnisex Regular T-Shirt
FitUnisex · Airlume 142 GSM
Blank ReferenceBella+Canvas 3001
Third-Party Certifications , WRAP, FLA, bluesign®, OEKO-TEX® Eco Passport · View supplier certifications
ProductionPrint on demand · Ethical manufacturing
BrandgrabNade
Product Safety (EU / GPSR)

Age Restrictions

  • For adults only.

EU Warranty

  • 2 years statutory warranty in accordance with EU consumer law.

EU Product Safety & GPSR Compliance

In compliance with the General Product Safety Regulation (GPSR), grabNade and SINDEN VENTURES LIMITED ensure that all consumer products offered are safe and meet EU standards.

For any product safety related inquiries or concerns, please contact our EU representative:
📧 gpsr@sindenventures.com

320, rue Saint-Honoré, 75001 Paris, France
— or —
Markou Evgenikou 11, Mesa Geitonia, 4002, Limassol, Cyprus

Visa alla uppgifter

> Featured In

Mirror Finish Ra 0.02

Mirror Finish Ra 0.02

What does an Ra 0.02 surface finish actually require? Known as the mirror finish, it represents the absolute limit of conventional precision machining—a surface so...

[ READ ARTICLE ]