Optimize Toolpaths | CNC Machinist T-Shirt

100% Airlume Combed Ring-Spun CottonLightweight

  • Black t-shirt with "Optimize tool paths. Excuses not in the G-code" text for CNC machinists.
  • Man in black t-shirt with "Optimize tool paths. Excuses not in the G-code" text for CNC machinists.
  • Woman in black t-shirt with "Optimize tool paths. Excuses not in the G-code" text for CNC machinists.
  • Close up of black t-shirt with "Optimize tool paths. Excuses not in the G-code" text for CNC machinists.
  • Man in navy t-shirt with "Optimize tool paths. Excuses not in the G-code" text for CNC machinists.
  • Woman in navy t-shirt with "Optimize tool paths. Excuses not in the G-code" text for CNC machinists.
  • Close up of navy t-shirt with "Optimize tool paths. Excuses not in the G-code" text for CNC machinists.
  • Man in white t-shirt with "Optimize tool paths. Excuses not in the G-code" text for CNC machinists.
  • Woman in white t-shirt with "Optimize tool paths. Excuses not in the G-code" text for CNC machinists.
  • Close up of white t-shirt with "Optimize tool paths. Excuses not in the G-code" text for CNC machinists.
1 10
€25,95 EUR
€25,95 EUR
Rea Slutsåld
Tullavgifter och skatter ingår. Frakt beräknas i kassan.
5.0 (6 store reviews)
Color
Size

Shipped from the EU

Size Guide

Height: 5'5" (165cm)

Chest circumference: 34.2" (87cm)

Waist circumference: 25.2" (64cm)

Hips: 37" (94cm)

Height: 6'1" (185cm)

Chest circumference: 39.4" (100cm)

Waist circumference: 30.3" (77cm)

Hips: 36.6" (93cm)

Spec Block

Design Story

Built for the engineer who optimizes tool paths for cycle time, tool life, and surface finish — in that order.

When the spindle is turning, the machine doesn't care about your theories, your mood, or your deadline. It only reads the coordinates. If the cycle time is too long or the part is out of spec, the truth is written in the program. This engineer t-shirt is the ultimate statement for the shop floor: stop talking, check the feeds and speeds, and fix the code. Because the CNC machine doesn't accept apologies.

Use Case

Best For

Best for CNC programmers, CAM engineers, and senior machinists who can read a toolpath and instantly see wasted motion.

  • CNC machinists proving out new programs on the shop floor.
  • CAM programmers optimizing high-speed trochoidal toolpaths to shave off seconds.
  • Manufacturing engineers focused on cycle time reduction and tool life.
  • Shop floor supervisors who demand efficient production, not stories.

Signal

Gift Guide

A smart gift for anyone who talks about adaptive clearing, trochoidal paths, and chip load the way other people talk about sports.

Looking for a genuine engineer gift for the guy who speaks fluent Fanuc or Haas? This unique programmer t-shirt is the ultimate piece of machinist apparel. Whether it's for a veteran CNC operator in Michigan or a young manufacturing engineer in Texas, this funny engineer shirt speaks their exact language.

Produkt-specifikationer

The Premium Fit You Deserve.

This isn't just another stiff shirt. We use the Bella+Canvas 3001, renowned for its incredibly soft, broken-in feel right out of the box.

  • Fit & Feel: Retail Fit (Unisex) – True to size with a slightly tailored cut. Not too boxy, not too tight.
  • Premium Fabric: 100% Airlume combed & ring-spun cotton (4.2 oz/yd²). Pre-shrunk to minimize shrinkage.
  • Durability: Side-seamed construction with shoulder-to-shoulder taping for lasting shape.
  • Ethical Sourcing: Dyed & Cut in the USA, assembled in Nicaragua/Honduras/Guatemala.
  • Printed with Care: Printed locally to ensure faster shipping and reduced carbon footprint.

Model Reference: Bella+Canvas 3001 (The Gold Standard of Premium Tees).

Vaschhandledning

  • Wash 30C Icon

    Wash cold (30°C / 86°F), inside out, with similar colors.

    Use mild detergent. No bleach. No softeners.

  • No Bleach Icon

    Do not use bleach. It can damage fiber integrity.

    Tip: Use oxygen-based stain removers if necessary.

  • Tumble Dry Low Icon

    Tumble dry Low or Hang dry (Recommended).

    Optimum: Flat air dry to preserve fiber tension.

  • Iron Low Icon

    Iron on Low Heat if needed. Do NOT iron prints.

    Fabric naturally resists wrinkling post-wash.

  • No Dry Clean Icon

    Do not dry clean. Chemical solvents damage prints.

  • Eco Ink Icon

    Water-based inks.

    A faint scent may be present after printing and typically dissipates after the first wash.

"Treat your gear like hardware. Maintain it."

Certifieringar (komponentnivå)

The certifications below apply exclusively to the blank garment manufacturer and inks. The final printed product sold by grabNade is not independently certified.

• WRAP (Worldwide Responsible Accredited Production): The blank garment (Bella+Canvas 3001) is manufactured in WRAP-Platinum certified facilities, ensuring ethical, humane, and lawful conditions.
• FLA (Fair Labor Association): Bella+Canvas is an accredited FLA Participating Company, committed to upholding the highest labor standards globally.
• Eco-Friendly Dyes: The dyeing process uses bluesign®-approved dyes only, ensuring strict chemical safety and reduced water impact.
• Printing Safety: Our printing partners use water-based inks that are OEKO-TEX® Eco Passport certified, safe for adults and children.

Note: Any slight scent from the fixation agent is normal and disappears after the first wash.
More info: Supplier Certifications

Product Datasheet
StyleUnisex Regular T-Shirt
FitUnisex · Airlume 142 GSM
Blank ReferenceBella+Canvas 3001
Third-Party Certifications , WRAP, FLA, bluesign®, OEKO-TEX® Eco Passport · View supplier certifications
ProductionPrint on demand · Ethical manufacturing
BrandgrabNade
Product Safety (EU / GPSR)

Age Restrictions

  • For adults only.

EU Warranty

  • 2 years statutory warranty in accordance with EU consumer law.

EU Product Safety & GPSR Compliance

In compliance with the General Product Safety Regulation (GPSR), grabNade and SINDEN VENTURES LIMITED ensure that all consumer products offered are safe and meet EU standards.

For any product safety related inquiries or concerns, please contact our EU representative:
📧 gpsr@sindenventures.com

320, rue Saint-Honoré, 75001 Paris, France
— or —
Markou Evgenikou 11, Mesa Geitonia, 4002, Limassol, Cyprus

Visa alla uppgifter

> Featured In

Mirror Finish Ra 0.02

Mirror Finish Ra 0.02

What does an Ra 0.02 surface finish actually require? Known as the mirror finish, it represents the absolute limit of conventional precision machining—a surface so...

[ READ ARTICLE ]